Any homeowner who does not happen to be a professional plumber, will eventually be dealt a headache or two by some plumbing problem in their house. Sometimes, you may have to wait if you are calling a plumber, and it can be expensive as well. Read the following article and you’ll be able to take on any simple plumbing problem easily.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.
It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.
To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.
Do not put any oil, fat, or greasy foods or products in your sink. Oils will eventually harden and clog up your drain. If the sink has a garbage disposal, it will also make the blades less efficient. Make sure you dispose of oils away from the sink.
Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your “sweating” pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.
There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.
As you can see, plumbing problems don’t have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you’ve learned from this article next time you have a plumbing problem!